1. Ricoh 5 in 1 Card Reader Diver:
Download Link : SP37726
Installation:
right click on the SP37726 and select run as admin.
If you are a advance user i recommend to install using device manager.
The package will install:
Ricoh SD/MMC Host Controller
Ricoh xD-Picture Card Controller
Ricoh Memory Stick Host Controller
2. Coprocessor Driver :
Download link : sp36213
Installation: right click on the SP36213 and select run as admin.
If you are a advance user i recommend to install using device manager
The package will install:
NVIDIA nForce System Management Controller
Nforce chipset Driver.
3.AuthenTec Inc. AES1610 Fingerprint Driver
Download link : SP37731
Installation:
right click on the SP37731 and select run as admin.
If you are a advance user i recommend to install using device manager.
4. HP Qiucklaunch Button
Download Link : sp47275
Installation Instruction:
Install the driver by double click on the SP47275.
ADDITIONAL INFORMATION:
1. Some of the driver above is the original Vista driver form HP, but you can install them on windows 7 system by run it as admin.
2. If direct installation failed, change the driver comaptibilities by:
- Right click on the driver file and select PROPERTIES.
-select COMPATIBILITY.
-Tick the box "run this program in compatibility mode for" Select WINDOWS VISTA.
-The APPLY and closed. Right click and select Run As Admin.
3. If didn't work, you will have the driver folder on this location : C:\SWSetup. So next:
-Open device manager by click start and type DEVICE MANAGER and press enter.
-Device manager will open and look at the OTHER DEVICE. you will see system base device (RICOH) , co processor, Usb device (FINGERPRINT) and Unknown device(HP QUICKLAUNCH) mark with Yellow !.\
-Right click on them and select UPDATE DRIVER. select Browse my computer for driver software and select BROWSE. Point to C:\SWSetup\SPXXXX (related driver folder).
If you have any questions or problems just leave it in the comments section below.
Any further information or feedback are welcome.
